Liquid in Charging Port Issue Fix

How to Fix “Liquid in Charging Port” Issue

When you connect a Lightning cable or an accessory to your iPhone XS, iPhone XS Max, iPhone XR, or later, your iPhone can warn you if there’s liquid in the Lightning port. If your iPhone display a “Charging Not Available” error that says “Liquid has been detected in the Lightning connector.”. Please refer to following steps to fix the issue.

What Does the Alert Mean?

Liquid Detected in Lightning Connector

When you see the “Liquid Detected in Lightning Connector” notification, it usually means either the charging port or lightning accessory is wet. Sometimes even a slightly damp or moist port or accessory can trigger the alert.
However, “water-resistant” doesn’t mean waterproof. Your iPhone’s internals can still get water damage if exposed to water or any liquid.  The pins within the lightning connector are among the key components vulnerable to water damage, hence the alert and subsequent stopping of charging or use of the accessory.

What NOT To Do

Liquid Detected in Lightning Connector What to Do Next shouldn’t click the emergency override button on the alert. You could severely damage your iPhone, causing more problems in the long run.
2. don’t try to dry the lightning connector using an external heating source like a hair dryer or heater. The heat could damage the battery or worsen the corrosion.
3.You also shouldn’t try blowing the water out using compressor air, or even your mouth, as you’re more likely to push the water further into your phone.
4.It is not a good idea shove cotton swabs or paper towels into the connector either. While these can absorb moisture, you’ll more than likely damage pins further or push other debris deep into your phone.

What to Do If There’s Water

Remove Any Accessories

Remove Liquid from Lightning Port by Air-Drying

Using Rice to Dry Out Your Lightning Port

Liquid Detected in Lightning Connector What to Do Next

Or Using Silica Packets to Dry Out Your Lightning Port

Liquid Detected in Lightning Connector What to Do Next

What To Do If There Is No Water

Sometimes, the “Liquid Detected in Lightning Connector” alert pops up even when your iPhone hasn’t been exposed to moisture and water. This annoying and stress-inducing bug is one of the many iPhone issues cropping up in recent iOS updates.

While you don’t run the risk of damaging your iPhone if you keep the lightning accessory plugged in, the alert is still frustrating. The iPhone won’t charge, or the accessory won’t work at all.

Luckily, there are a few ways around this iPhone error. Some can even fix this iPhone issue altogether.

Force Restart the Phone

reboot iphone

As with most technical bugs and glitches, sometimes one of the easiest fixes is switching the phone on and off again. Depending on which iPhone mode you have, the process to force restart is different.

Once your iPhone turns back on, you should no longer get the pesky alert.

However, if the alert still appears, there could be something wrong with your lightning connector. Sometimes, the alert appears if something dry is stopping the lightning connector from functioning correctly.

Take a flashlight and inspect the lightning connector port. If you spot any dust or debris in there, it could be time to clean your iPhone. Take some compressed air, and gently blow out any debris.

Select Emergency Override

If your iPhone hasn’t been exposed to water or liquid, and there isn’t any dust in the connector, you can safely tap the emergency override button.

As mentioned, this button will both dismiss the alert and allow the phone to resume its normal function. Once you click the emergency override button, you can charge your iPhone, or use any other lightning accessory.

While this doesn’t fix the error completely, you can at least still use your iPhone. However, until the bug is rectified, you’ll more than likely continue to get this annoying alert.

Ensure the Phone is Up to Date

Most bugs and iPhone issues get fixed in minor iOS updates. While the “Liquid Detected in Lightning Connector” alert bug has recently popped up because of  new updates, Apple will more than likely output a fix soon.

How do you update your iPhone? Luckily, no matter what iPhone model you have, the process is the same.

Before updating, it’s always good practice to back up your iPhone in case of any data loss. There are a few ways to do this; using iCloud, your Mac, or PC.

How To Protect the Lightning Connector

Liquid Detected in Lightning Connector What to Do Next

The best way to avoid any potential issues with your iPhone’s lightning port is by protecting it and keeping it clean.

When cleaning, remember to switch your phone off and only use safe products. Avoid metal cleaning supplies, using plastic or wooden toothpicks when clearing out dust debris.

You can also use compressed air when cleaning dust debris from the port. However, if you’re concerned about water damage, don’t use compressed air.

To keep the lightning port dry, it’s best to avoid unnecessary bodies of water. Keep your phone away from swimming pools and precariously placed glasses and bottles of water or liquid.

However, accidents can still happen. While the latest iPhone models (the iPhone 7 and newer) are water-resistant, extra protection is always a good idea.

The best way to add extra protection to your iPhone, and its lightning port, is with a great all-around cover.

Additional, use stable and smart power adapters is also important to protect your iphone battery, you may visit Fast Charger for iPhone to choose one.

Leave a Comment

You must be logged in to post a comment.